1.Open glove compartment. Remove the six retaining screws to remove the glove box assembly (four across the top and two below).
NOTE: It is not necessary to remove the top two screws for the glove box striker.

2.Remove the glove box assembly to access the cabin air filter cover in the upper right.

3.Remove the cover’s retaining screw, then the cover to access the cabin air filters.

4.To remove the first filter pull straight out and then slide the second filter to the left and pull straight out.

5.Install new cabin air filters by inserting the first filter and sliding it over to the right, then install the second filter.
NOTE: Air flow arrow should face down when installed.

6.Reattach the cabin air filter cover.
7.Reattach the glove box assembly.
8.Close the glove compartment.